Power Cable :

Cable for electric vehicle charging system

Application: the cable for electric vehicle conductive charging system is suitable for pure electric vehicles, fuel cell vehicles and hybrid electric vehicles. It is widely used for charging connection between electric vehicles and power supply, or for electric vehicle charging equipment and charging port, or vehicle charge and discharge early warning control system with control signal transmission function for charging saturation safety early warning and other aspects
Send message
htcable@huataiglobal.com
+
Introduction Specification

National standard electric vehicle charging cable

Application: the cable for electric vehicle conductive charging system is suitable for pure electric vehicles, fuel cell vehicles and hybrid electric vehicles. It is widely used for charging connection between electric vehicles and power supply, or for electric vehicle charging equipment and charging port, or vehicle charge and discharge early warning control system with control signal transmission function for charging saturation safety early warning and other aspects

Executive standard: GB / T 33594-2017

Usage characteristics

The rated voltage is AC 450 / 750V and DC 1KV

 Bending radius: the minimum bending radius of the cable shall not be less than 6D (D is the cable diameter)

The product has the advantages of flame retardancy, softness, oil resistance, UV resistance and strong resistance to vehicle pressure

 

Basic model and name of product

Type Name

SS

 Thermoplastic elastomer insulated thermoplastic elastomer sheathed electric vehicle charging cable

SSPS

 Thermoplastic elastomer insulated copper wire braided thermoplastic elastomer inner sheath and sheath electric vehicle charging cable

SF

 Thermoplastic elastomer insulated thermosetting elastomer sheathed electric vehicle charging cable

SSPF

 Thermoplastic elastomer insulated copper wire braided thermoplastic elastomer inner sheath thermosetting elastomer sheath electric vehicle charging cable

S90S90

 Thermoplastic elastomer insulated thermoplastic elastomer sheathed electric vehicle charging cable

S90F

 Thermoplastic elastomer insulated thermosetting elastomer sheathed electric vehicle charging cable

S90S90PF

 Thermoplastic elastomer insulated copper wire braided thermoplastic elastomer inner sheath thermosetting elastomer sheath electric vehicle charging cable

S90U

 Thermoplastic elastomer insulated polyurethane elastomer sheathed electric vehicle charging cable

S90S90PU

 Thermoplastic elastomer insulated copper wire braided thermoplastic elastomer inner sheath polyurethane elastomer sheath electric vehicle charging cable

S90UPU

 Thermoplastic elastomer insulated copper wire braided polyurethane elastomer inner protective layer and sheath electric vehicle charging cable

EU

 EPDM or similar synthetic materials insulated polyurethane elastomer sheathed electric vehicle charging cable

EUPU

 Ethylene propylene rubber or similar synthetic materials insulated copper wire braided polyurethane elastomer inner protective layer and sheath electric vehicle charging cable

EF

 Electric vehicle charging cable with insulating thermosetting elastomer sheath made of ethylene propylene rubber or similar synthetic materials

EFPF

 Ethylene propylene rubber or similar synthetic materials insulated copper wire braided thermosetting elastomer inner sheath polyurethane elastomer sheath electric vehicle charging cable

EYU

 EPDM or similar synthetic materials insulated polyurethane elastomer sheathed electric vehicle charging cable
Note: when the cable conductor is the sixth conductor, add "R" to the model on the left

 

European EN50620 standard AC electric vehicle charging cable

Application: the electric vehicle charging cable is used to connect the electric vehicle charging device and charging infrastructure, so as to transmit power to the electric vehicle, and is equipped with a certain number of signal lines, control lines, power auxiliary lines, etc. to ensure the accurate control and safe operation of the whole charging process. Charging cables are generally used in charging stations, parking lots, hotels, communities, garages and other areas. Portable charging cables can be placed in cars.

Executive standards: EN50620, IEC62893

Product structure

NO Structure

1

Conductor Material  Bare Copper

2

 Insulation Material

3

 Color： Brown，Blue，Yellow/Green

4

 Filler Material: PP Cord

5

 Tape Material:Non-woven fabrics

6

 Sheath Material: TPU

7

 Color: Black

 

Product performance

NO Features

1

 Rated temperature ：-40℃～90℃

2

 Rated Voltage ： AC 300/500V、 450/750V；DC 1000V

3

 Flame Test ：VW-1 Test method Comply with UL 2556

4

 Min： Bending Radius: ≥6*D

5

 Dielectric Voltage： 2.5kVac/15min. No Breakdown

6

 Low temperature impact  ：-40℃, No cracks

7

 Hot Shock：150℃/1h No cracks

8

 Oil Resistance ：IRM902,IRM903,Gasoline  20h OD Variation≤15% No Cracks

9

 Crush resistance：Sq≤4, crush force≥4KN ; 4≤Sq≤35, crush force≥11KN;

10

 Resistance to Acid and alkali：168h, Tensile Strength Variation ≤30%; Elongation≥100%

11

 Environmental Requirements：Compliant with RoHS and REACH

 

Cable model, name and section

Type Name Section（mm2）

H05BZ-F

 Rated voltage 300 / 500V ethylene propylene rubber insulated pur elastomer sheathed European standard flexible cable for mobile connection of electric vehicle

1.5-16

H07BZ-F

 Rated voltage 450 / 750V ethylene propylene rubber insulated pur elastomer sheathed European standard flexible cable for mobile connection of electric vehicle

1.5-16

Message

submit