Several advantages of copper core cable over aluminum core cable
Time of Release:
2022-11-26
Source:
Author:
Several advantages of copper core cable over aluminum core cable
1. Low resistivity: The resistivity of aluminum core cable is about 1.68 times higher than that of copper core cable.
2. Good ductility: the elongation rate of copper alloy is 20~40%, the elongation rate of copper for electrical engineering is more than 30%, and the elongation rate of aluminum alloy is only 18%.
3. High strength: the allowable stress at room temperature, copper is 7~28% higher than aluminum. Especially the stress at high temperatures, the difference between the two is even greater.
4. Fatigue resistance: aluminum is easy to break after repeated bending, but copper is not easy. In terms of elasticity indicators, copper is also about 1.7~1.8 times higher than aluminum.
5. Good stability and corrosion resistance: the copper core is oxidation and corrosion resistant, while the aluminum core is easily oxidized and corroded.
6. Large ampacity: Due to low resistivity, the copper core cable of the same section is about 30% higher than the allowable ampacity (maximum current that can be passed) of the aluminum core cable
7. Low voltage loss: Due to the low resistivity of the copper core cable, the same current flows through the same section. The voltage drop of the copper core cable is small. The same transmission distance can ensure higher voltage quality; Under the allowable voltage drop conditions, the copper core cable transmits electric energy to a long distance, that is, the power supply coverage area is large, which is conducive to network planning and reduces the number of power supply points.
8. Low heating temperature: Under the same current, the heat generation of the copper core cable of the same section is much smaller than that of the aluminum core cable, which makes the operation safer.
9. Low energy consumption: Due to the low resistivity of copper, the low power loss of copper cables compared to aluminum cables is obvious. This helps to improve the efficiency of power generation and protect the environment.
10. Anti-oxidation and corrosion resistance: The connector of the copper core cable has stable performance and will not cause accidents due to oxidation. The joint of the aluminum core cable is unstable, and accidents often occur due to oxidation that increases the contact resistance and heats up. Therefore, the accident rate is much larger than that of copper-core cables.
11. Convenient construction:
The copper core is flexible and the allowable bending radius is small, so it is convenient to bend and easy to penetrate the pipe;
The copper core is fatigue-resistant, and it is not easy to break after repeated bending, so the wiring is convenient;
The copper core has high mechanical strength and can withstand large mechanical tensile forces, which brings great convenience to construction and laying, and also creates conditions for mechanized construction.
previous page:
Next page:
Related information
How to Maintain 0.6/1kV Single Core Copper Power Cables for Longevity
How to Maintain 0.6/1kV Single Core Copper Power Cables for Longevity Table of Contents Introduction to Power Cable Maintenance Understanding 0.6/1kV Single Core Copper Power Cables The Importance of Maintaining Power Cables Best Practices for Maintaining Power Cables Environmental Factors to Consider Conducting Regular Inspections Proper Cable Storage Techniques
2026-05-14
Understanding 450/750V House Use Electric Wires: Essential Insights for Professionals
When it comes to residential electrical installations, understanding the specifications and applications of 450/750V house use electric wires is essential for electricians and electrical professionals. These wires are designed to handle specific voltage levels, making them suitable for various domestic applications, including lighting, power distribution, and appliance wiring. ### Specifications o
2026-05-14
The Environmental Impact of 26/35kV Single Core Aluminum Power Cables: An In-Depth Analysis
The Environmental Impact of 26/35kV Single Core Aluminum Power Cables In the realm of electrical engineering, 26/35kV single core aluminum power cables play a pivotal role in the efficient transmission of electricity. As global energy demands escalate, the environmental implications of these cables warrant thorough examination. This article seeks to elucidate the multifaceted environmental impacts
2026-05-13
0
Hunan Huatai Cable Co. LTD
Xiadopu Machinery Industrial Park, Ningxiang, Xiangjiang New District, Hunan Province
Follow us